About Graphene Heating Films Foor Heating：10 Quick Questions & Answers

Indoor drying is determined by two factors. One is the relative humidity of the indoor air, and the second is the strength of the humidity on the skin surface due to the indoor air flow, that is, the wind speed of drying. Graphene floor heating, the indoor temperature is usually set at 18°C, which is a comfortable temperature for the human body, and will not reduce the relative humidity of the indoor air; graphene floor heating transfers heat evenly in the form of far-infrared light waves, so there is no air convection. Skin will not be blown dry. On the contrary, if you use air conditioner heating, you will feel particularly dry. Air conditioner heating will not only reduce the relative humidity of the indoor air, but also accelerate the intensity of indoor air convection, making the skin particularly prone to dryness, and the body feels inferior to floor heating.

01. Lifetime maintenance-free. Gas wall-hung boilers and plumbing systems are too complicated, and they are a combination of water, electricity, and gas systems. Therefore, the probability of failure is relatively high, and the maintenance cost is high. Graphene electric floor heating is maintenance-free for life.
02. Instant heating, flexible use. It is suitable for places that do not need 24hr continuous uninterrupted heating, especially some business places. Therefore, the cost of use is also lower than that of gas heating.
03. Low cost. The building area of less than 140 square meters is lower than the cost of gas heating, and the cost advantage of small houses is more obvious.
04. Does not take up floor height. The thickness of electric floor heating is thin, unlike water floor heating, which takes up 8-10 cm of floor height.

Any heating system equipment has radiation, which is called thermal radiation.

Graphene heating films floor heating uses far-infrared light wave radiation heating. It emits 8-15um far-infrared light waves, which is just the life light wave needed by the human body. It promotes the metabolism and blood circulation of the human body and has a certain physiotherapy effect. Heating in winter is as comfortable as basking in the sun.

It can generally reach around 18 ° C-26 ° C, fully meeting winter heating needs. Of course, the indoor heating temperature is closely related to the insulation performance of the house, and the amount of heat generated is the key. It is also related to our usage habits.

Not only Graphene floor heating, but also other forms of floor heating will not cause additional risk of formaldehyde release.

At present, floor heating is gradually popularized. Almost all floor manufacturers have launched floor heating special floors, which are more strict in formaldehyde content, water content, deformability and other parameters, and more green and environmentally friendly.

The heating rate of electric floor heating is much faster than that of water floor heating. In winter, if the floor heating is turned on for the first time if the floor is paved, it can reach around 29 ° C in 15 minutes, and the whole house can basically reach a comfortable temperature in about an hour. If the ground is paved with tiles, the cement layer has a certain insulation effect, and the ground can reach around 29 ° C in about one hour. Such a rapid heating rate is impossible for water floor heating.

Graphene floor heating uses Graphene as the heating raw material. Because Graphene has the characteristics of strong stability, it has a long service life. It has been opened continuously for 30000 hours without failure. The service life can reach 30-50 years. The technology is mature and the system is simple. As long as the product is qualified and installed in a standardized manner, it can almost be maintained throughout the entire life cycle of the building. The wall-mounted boilers in water heating systems generally cannot exceed the design service life of 15 years, and they often require cleaning and maintenance throughout the entire service life, and may also require replacement of system components.

The Graphene Underfloor heating is simple in structure and requires no later maintenance after installation. There are no additional expenses except for electricity bills. The water heating system needs to be cleaned and maintained every 2-3 years, and each cleaning and maintenance cost a lot of money. Therefore, the later maintenance of Graphene floor heating is not only a matter of saving money but also a matter of peace of mind.

The thickness of the Heating film is only 0.338cm, while the overall thickness of the integrated Graphene Underfloor heating is about 2cm, which does not account for the height of the layer and is thin. It is also one of the outstanding advantages of Graphene floor heating.

Graphene floor heating is a kind of heating equipment, which definitely consumes more electricity than household appliances such as refrigerators and washing machines. According to comprehensive statistics, most Graphene electric heating households use electricity between 800 and 2500 degrees per month. Compared with gas-fired water heating, the cost is reduced by about 30%, which is very energy-saving.