Underfloor heating cost per m2

Underfloor heating cost per m2 may vary greatly due to several factors, including the type of underfloor heating system (cable underfloor heating or water heating or new graphene electric heating film), the size of the heating area, the current construction status (new construction, renovation, renovation), and differences in labor costs and material prices in countries or regions. From a long-term perspective, there is also the cost of use to consider.

Table of Contents

underfloor heating cost per m2: Cable underfloor heating

Cable underfloor heating, including heating pads or wires installed under the floor surface. They are usually cheaper than plumbing installations, but their operating costs may be higher depending on the local electricity price.

Installation cost

Installation cost: On average, in terms of materials (heating pads or cables) alone, you may need to pay a fee of approximately 10 to 20 pounds per square meter. However, if the installation cost includes professional personnel, the price may rise to between 20 and 30 per square meter or higher, depending on the complexity of the installation and the fees charged by the installation personnel.

underfloor heating cost per m2: water-based underfloor heating

Water based or wet systems circulate warm water through pipes under the floor. They have higher installation costs, but may be more cost-effective in the long run, especially if you have a large heating area or if the system is integrated into a new building with a suitable heat source (such as a heat pump).

Installation cost: The cost of water-based systems may be much higher, mainly due to the complexity of installation. The price, including materials and professional installation, may range from 30 to 50 per square meter, or even higher. For large-scale projects or new buildings, economies of scale may reduce costs per square meter.

underfloor heating cost per m2: graphene electric heating film

Due to various pain points, such as high power consumption, difficult installation, and the need for maintenance, whether it is plumbing or cable floor heating, graphene electric heating film has been invented and manufactured.

The total cost per square meter of this new type of floor heating is between 15-25, and its installation is relatively simple, with installation costs ranging from 20 to 30 or higher. Its price is basically similar to that of cable underfloor heating, but the cost of electricity operation is much lower than that of cable underfloor heating.

underfloor heating cost per m2：Other costs to consider

Floor finish:

The type of floor you choose will affect the overall cost. Some floor materials, such as thick carpets, can provide insulation and are not recommended for cable and water heating systems. The heating method is heat conduction. Ceramic tiles and stones are excellent conductors and are preferred, but may require higher costs. The heating method of graphene electric heating film underfloor heating is mainly far-infrared radiation heating, so there is no requirement for the floor material, and it is also suitable for composite wood flooring.

Insulation:

Proper insulation is crucial for the efficiency of underfloor heating systems. In the overall budget, the cost of thermal insulation for the occupied area should also be considered.

Operating costs: This will depend on the type of system, household efficiency, and heating volume. The hourly operating cost of cable underfloor heating may be higher than that of water-based systems, especially if the water-based system is connected to an efficient boiler or heat pump. Due to its efficient heating method, the cost of graphene electric heating film is lower than the previous two. The author has tested it with a manufacturer and maintained a heat of 1 square meter for 24 hours. The actual operating time was 4 hours, consuming a total of 1 kilowatt hour of electricity. A ten square meter room consumes a total of 300 kilowatt hours of electricity per month.

Maintenance:

Water based systems typically require less maintenance than cable underfloor heating systems, but if problems arise, considering the need for embedded pipelines, maintenance costs may be higher. The maintenance cost of graphene cable underfloor heating is basically zero, and its service life is over 50 years

Summary of underfloor heating cost per m2

Considering these variables, from purchase cost, installation cost, and usage cost, the author recommends graphene geothermal film, which is the future direction of the entire underfloor heating industry.