Get free sample quota
Experience the excellent energy-saving underfloor heating brought by new technology
The Installation and Instructions for Graphene Electric Underfloor Heating
Learn about graphene electric underfloor heating installation steps, instructions, precautions, and troubleshooting.
Graphene Electric Underfloor Heating Installation
Please click on the blog and video to see the specific installation steps according to the graphene floor heating product you choose.
2.Graphene Underfloor Heating Film Pad
3.Integrated Graphene Floor Heating Pad
FAQ of Graphene heating films floor heating
Indoor drying is determined by two factors. One is the relative humidity of the indoor air, and the second is the strength of the humidity on the skin surface due to the indoor air flow, that is, the wind speed of drying. Graphene floor heating, the indoor temperature is usually set at 18°C, which is a comfortable temperature for the human body, and will not reduce the relative humidity of the indoor air; graphene floor heating transfers heat evenly in the form of far-infrared light waves, so there is no air convection. Skin will not be blown dry. On the contrary, if you use air conditioner heating, you will feel particularly dry. Air conditioner heating will not only reduce the relative humidity of the indoor air, but also accelerate the intensity of indoor air convection, making the skin particularly prone to dryness, and the body feels inferior to floor heating.
01. Lifetime maintenance-free. Gas wall-hung boilers and plumbing systems are too complicated, and they are a combination of water, electricity, and gas systems. Therefore, the probability of failure is relatively high, and the maintenance cost is high. Graphene electric floor heating is maintenance-free for life.
02. Instant heating, flexible use. It is suitable for places that do not need 24hr continuous uninterrupted heating, especially some business places. Therefore, the cost of use is also lower than that of gas heating.
03. Low cost. The building area of less than 140 square meters is lower than the cost of gas heating, and the cost advantage of small houses is more obvious.
04. Does not take up floor height. The thickness of electric floor heating is thin, unlike water floor heating, which takes up 8-10 cm of floor height.
Any heating system equipment has radiation, which is called thermal radiation.
Graphene heating films floor heating uses far-infrared light wave radiation heating. It emits 8-15um far-infrared light waves, which is just the life light wave needed by the human body. It promotes the metabolism and blood circulation of the human body and has a certain physiotherapy effect. Heating in winter is as comfortable as basking in the sun.
It can generally reach around 18 ° C-26 ° C, fully meeting winter heating needs. Of course, the indoor heating temperature is closely related to the insulation performance of the house, and the amount of heat generated is the key. It is also related to our usage habits.
Not only Graphene floor heating, but also other forms of floor heating will not cause additional risk of formaldehyde release.
At present, floor heating is gradually popularized. Almost all floor manufacturers have launched floor heating special floors, which are more strict in formaldehyde content, water content, deformability and other parameters, and more green and environmentally friendly.
The heating rate of electric floor heating is much faster than that of water floor heating. In winter, if the floor heating is turned on for the first time if the floor is paved, it can reach around 29 ° C in 15 minutes, and the whole house can basically reach a comfortable temperature in about an hour. If the ground is paved with tiles, the cement layer has a certain insulation effect, and the ground can reach around 29 ° C in about one hour. Such a rapid heating rate is impossible for water floor heating.
Graphene floor heating uses Graphene as the heating raw material. Because Graphene has the characteristics of strong stability, it has a long service life. It has been opened continuously for 30000 hours without failure. The service life can reach 30-50 years. The technology is mature and the system is simple. As long as the product is qualified and installed in a standardized manner, it can almost be maintained throughout the entire life cycle of the building. The wall-mounted boilers in water heating systems generally cannot exceed the design service life of 15 years, and they often require cleaning and maintenance throughout the entire service life, and may also require replacement of system components.
The Graphene Underfloor heating is simple in structure and requires no later maintenance after installation. There are no additional expenses except for electricity bills. The water heating system needs to be cleaned and maintained every 2-3 years, and each cleaning and maintenance cost a lot of money. Therefore, the later maintenance of Graphene floor heating is not only a matter of saving money but also a matter of peace of mind.
The thickness of the Heating film is only 0.338cm, while the overall thickness of the integrated Graphene Underfloor heating is about 2cm, which does not account for the height of the layer and is thin. It is also one of the outstanding advantages of Graphene floor heating.
Graphene floor heating is a kind of heating equipment, which definitely consumes more electricity than household appliances such as refrigerators and washing machines. According to comprehensive statistics, most Graphene electric heating households use electricity between 800 and 2500 degrees per month. Compared with gas-fired water heating, the cost is reduced by about 30%, which is very energy-saving.
Graphene Electric Underfloor Heating Instruction
Read these instructions carefully before using for the first time.
1、Steps For FIrst Time Use
1.1 According to the instruction manual of the thermostat, turn on the power and set the temperature on the thermostat to run at 18°C.
1.2 Run continuously with electricity to ensure that the thermostat works normally until it is automatically disconnected. This period of running time is long and the main purpose is to drive away the cold radiation from the walls and floors in the room; detect whether the electric floor heating system is running normally.
2、Suggestions For Operation During Daily Use
2.1 When you go out for a short time, you can leave the thermostat on and keep the energy-saving status.
2.2 After returning home, adjust the thermostat control temperature up to the set temperature. In order to consider environmental protection and energy saving, it is recommended that the temperature setting should not exceed 20°C.
2.3 Before going to sleep at night, adjust the thermostat setting temperature down appropriately.
2.4 When you go out for a long time, you can turn off the thermostat to ensure energy saving and safety. When you return home, operate the system according to the first time you use it, and then resume the daily use mode after the system runs normally.
3、The setting of floor heating thermostat
3.1 Each room should be set independently thermostat separate to control room temperature.
3.2 The installation position of the thermostat is equal to the position of the room light switch, and the height from the ground is not more than 150cm and not less than 130cm.
3.3 Specific operation: see the thermostat for the details Instruction manual.
Attention
1、The heating room should have reasonable insulation measures to reduce the loss of indoor heat and effectively control the operation of the heating system. For example, close the doors and windows
2、If your region has peak and valley electricity prices, we recommend you avoid high prices and choose low prices when using.
3、It is not advisable to cover the surface of the decorative layer of electric floor heating with a large area of low heat transfer coefficient item， such as carpets with poor heat dissipation.
4、The system is strictly prohibited to immerse in water, and the accumulated water must be wiped dry in time.
5、In order to ensure the stability of the power supply, it is recommended to start the temperature control of each room at certain time intervals.
6、Failure must be immediately cut off the power and report Repair, non-professionals are strictly prohibited to operate.
7、Do not use nails or other sharp objects to damage the ground, so as not to cause a system failure.
Common Troubleshoot
Problem | Reason | Solution |
Thermostat does not display | -Thermostat is in energy saving state | -Touch any button on the thermostat |
Thermostat is always heating | -The room does not reach the set temperature | -Close the room doors and windows and turn on the machine continuously |
Thermostat does not start heating | -Set temperature too low | -Adjust the set temperature appropriately |
Indoor space is slow to heat up | -Bad airtightness of the use area | -Close doors and windows to reduce the movement of people |
We Provide Technical Services
If you don’t find what you are looking for in the above information, you can chat with us online or click Contact Us.